At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
DOES THE ON BOARD PROGRAMING THAT WORKS FOR GM
APPLY FOR A 03 ALTIMA IF THE VIN NUMBER STARTS WITH A 1 OR 4 CAN I PROGRAM MY TRANSPONDER KEY THE SAME WAY
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You can't. It has an immobilizer and and an alarm. You take your registration document to a Chrysler dealership and they will cut you a key based on the VIN Number. Then the transponder chip in the key needs programming. Get two done at the same time.
Hi, there are many videos in youtube regarding key programming especially Nissan Altima. I've found the video for our Nissan Altima company car key a year ago.
This 30-minute learn procedure should be used when all vehicle keys are desired to be replaced or reprogrammed. This procedure will erase all previously learned vehicle keys from the TDM. Once the 30-minute learn procedure has been completed, any remaining vehicle keys may be programmed using the Adding Keys procedure to ensure their continued functionality.
With an unlearned master vehicle key, turn ON the ignition, with the engine OFF.
Observe the security indicator, after approximately 10 minutes the telltale will turn off.
Turn OFF the ignition, and wait 5 seconds.
Repeat steps 1-3 two more times for a total of 3 cycles or 30 minutes.
Important: The TDM learns the key transponder information upon the ignition switch transition from OFF to ON. You must turn the ignition OFF before attempting to start the vehicle.
With a master vehicle key, start the vehicle. The vehicle has now learned the key transponder information.
If additional keys are required to be learned, refer to Adding Keys.
You will have to take the vehicle to a Mazda agent and ask them to program a transponder key for your car. Every key is specially programmed for a particular vehicle according to its VIN number.
a lot of the later model GMs are VIN locked, you will have to have the dealer program the ECM to work, you have a transponder in the key that is programmed to the old computer.
i believe all you need is the vin number and there computer will cut it to size and program it just call and ask the only dumb question is the one you don't ask
you have to tow car to dealer - then they cut and program key - yes,it is a bit pricey!
internet offers ways but will only work couple times - repos do same thing
Keys are not all the same, it is possible the key you bought may not work, it should be searched by VIN by the dealer, and the dealer has to program with factory scan tool, should cost no more than .5 hours in labor.
×