At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Probably just dealer getting their hands in your pockets for an inspection that is set to a particular mileage amount (like 150,000 miles) ? :)
To know for sure the code get a code scanner. For about the price of an inspection or code read (though some garages will do for free) get you own code reader. :)
How to reset on a VW- ("Volkswagen VW (with digital Odometer) The code on the mileage display when you start the car will read "IN01", "IN02" or similar. To clear this, use the following procedure (this should work on any VW with a digital odometer):
With the key out of the ignition press the odometer reset button and hold it down Turn the ignition on (warning lights come on) wait about 10-15 sec until most or the lights are off (still pressing odometer reset button) Turn ignition off (button still pressed) and remove the key Release reset button Interval should now be reset. If this is not the case, repeat the above procedure")
For your car instructions for reset (IF YOU THINK ITS JUST A $ERVICE CALL PLOY!) Audi A4 & A6 - 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Turn off the ignition
Press and hold the button on the left side of the display while turning the ignition on - Service OIL will be displayed
Pull out the button on the right side of the display until the service prompt is cleared
The display should now read ----
If the above procedure does not work, below is an alternative procedure:
With the ignition off, push the right button
Turn the ignition on and then pull the left button
Turn off ignition
1. Keys out of ignition- press and hold in trip odometer reset button "0.0" on right hand side of display
2. Still holding this button down, insert key into ignition and put to the on position without starting the car.
3. Display will read "service now"
4. let go of the "0.0" button and depress the "m" button on the left hand side of the display. this will re-set the service reminder. There is no confirmation on the display other than the words "service now" will disappear.
You can confirm that the service reminder has been reset, or check how many miles/days remain until service at any time by taking key out of the ignition and holding in the trip reset "0.0" button for between 3 and 5 seconds. The MFD will display miles and hours until next service. http://forums.vwvortex.com/showthread.php?2457779-reset-service-indicator
There is a fuel pump cutoff reset button (and a relay) it is located under the instrument panel at the right (passenger) hand cowl side "kick" side panel, press the button and when you hear a click it is reset.
the reset button on accent is located on the side of inner wing just tucked under the bulkhead it is a square unit with a rubber top this is the reset button so just press the rubber/button and try restart on uk models it is on drivers side so i assume if you have LHD your switch may be on right hand/drivers side ??
Tire pressure should be set at 32 PSI on all the tires. There is also a reset button to reset the TPMS,
To reset this system, you press a button to zero the system on the dash or through the on-board computer. If one of your tires is underinflated while trying to zero it, then you will not have a correct reading. Before you try to recalibrate the system, make sure your tires are set to the correct pressure spec. It's under the dash, to the right side of the steering column. Slide your hand around under there & you'll find it. Thank you for using Fixya, and good luck
1. Keys out of ignition- press and hold in trip odometer reset button "0.0" on right hand side of display 2. Still holding this button down, insert key into ignition and put to the on position without starting the car. 3. Display will read "service now" 4. let go of the "0.0" button and depress the
"m" button on the left hand side of the display. this will re-set the
service reminder. There is no confirmation on the display other than
the words "service now" will disappear. You can confirm that the service reminder has
been reset, or check how many miles/days remain until service at any
time by taking key out of the ignition and holding in the trip reset
"0.0" button for between 3 and 5 seconds. The MFD will display miles
and hours until next service.
1. Press and hold trip odometer reset button
2. Turn ignition key to run position KPII (not the start position)
3. Wait 30 seconds or until service light "!" begins blinking
4. Release Trip Odometer button
5. Turn ignition to off position
If that doesn't work try:
1. Press and hold trip odometer reset button
2. Turn ignition key to run position (not the start position)
3. Wait 30 seconds or until service light "!" begins blinking
4. Turn ignition to off position, the service light continues blinking
5. Release Trip Odometer button
The blink code you are refering to is : Intermittent or Repaired RH Radiator Primary Crash Sensor Feed/Return Circuit Open , which means your right hand side frontal crash sensor (airbag sensor) is not working, therefore your airbag system is disabled...
You will have to reset the maintance light. Turn the key in the on position.( Not the crank position ) Push the trip meter button until you see the mileage reading. Now turn key off and with left hand hold in trip button. While holding in the button with left hand turn key to on position until you see dash lights. Hold button in until light starts to blink then after 4 blinks release button for 4 blinks then hold in again until light resets. If it doesn't work try trip A instead of mileage reading.
You must be doing a step wrong, read the instructions carefully, you have missed something, have seen this before, customer says they can't get it to reset, I try and no problem.
×