SOURCE: serpentine belt diagram:
if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach
SOURCE: need engine specs for mitsubishi pajero 1996 3.5 lt 24 valve dohc
Here ya go....get the rest of the info right now.
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
SOURCE: Needed serpentine belt diagram for a 91 ply. voyager 3.3L engine
Here's a link to the diagram you need...
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7006
Good luck and please rate this solution. Thanks.
Testimonial: "Looks good."
SOURCE: need diagram for instaalling serpentine belt on
Picture is for the carbureted model but has the same patter as my fuel injected model. It's actually pretty easy to see how it goes. If the pully has groves then the grove side of the belt will fit right in it prefectly. If it's smooth then the back side of the belt with run along it. To loosen the belt tensioner do two things. first in the picture below you will see in the top middle you will see the tensioner. The back of the belt runs along it. You will notice that it looks like a solid peice. loosen the top slighty with i believe a 15mm. After that connect to the pully attached to it and pull back to the passenger side until you can slid the belt off the alternator. put back on in reverse order. really really simple once you do it. good luck
3,228 views
Usually answered in minutes!
×