A3-200 error code

MR KIRAN now which type of error is that the machine showing alert mi soon you will get immediate answer thanks

1087 1087, then 163 and press print button. then exicute and print button, you may be prompted to turn off and on copier.
if this does not work you will need to replace the fuser assy

Print Mode Error is Chenglish for a problem with printing. Press the Print key at the left side of the panel, then the display should tell you to add paper etc

Hello Manuel sorry for your machine to be in that stake but have you tried to check on that paper conveying motors because that error is for those lift motors try to go on your machine run this code
press status/job cancel
enter 1087*2 twice
enter 906 and then you will see execute
the you press start to see whether it will stablize

When Your Kyocera Mita KM 5035 Indicates Code 7410, It's the problem with your Drum Unit Or Drum. You Can Solve This Problem Either By Changing If You Have Another Drum Or Buy A New Drum Unit.

This is fuser unit error code, you can try to reset it might work, but if the erorr code came back then you need to change the fuser unit.

In order to reset this code: follow those steps
on the panel press 1087 1087
The screen will change to service mode
on the panel again press 163
now look at the screen and you will see Excute.
Select Excute and press the Start key.
The Machine will rebot or it will asks you to turn it off and on.
After the machine load again, it should be good, if the Error came back!! Then change the Fuser Unit.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

what kind of report .if u wanna print counter then press the stop button for 3 secs and then press start to get report

to get the print press down arrow key it will show use alternative paper ? in display then press two times enter key it will print.............


its is the problem with the document page setting which one you giving print .......... its shows because its asking the paper according the document page setting ..........

Hello sir;Follow the following steps to reset;
1, press "1087' "1087",
2, enter 45 then press print.
3, use zoom key to achieve a reading of "3", then press "print", "stop/clear"

error 610 machine kyocera km-3035 ????