Updated blu-ray, still can't play toy story 3... all other discs work fine

This sounds like the Actual dvds or corrupt. If they are copies they may not play well.
I hope this helps.

It appears that the device is capable of multidisk formats though not entirely manucfactured for that purpose. Actually blu rar disks are not that different from DVDs. However, to achieve the experience of Blu ray, should acquire an entirely compartible disk player.

I had the problem with this player and disc where the audio worked for the previews but once the film started it got jittery and the sound went in and out. I went to the audio set-up and switched it from 7.1 to 5.1 and the problem was immediately solved. Is this the problem you have? I surfed around and a lot of people have experienced this problem with Toy Story 3 and this particular player.

I too had this problem with my disc. I changed the audio in the set-up from 7.1 to 5.1 and voila- problem solved.

Once main feature has started, press audio button twice on remote control as movie is playing and audio problem will be gone.

I had this problem too. I went to the audio set-up and switched it from 7.1 to 5.1 and the problem was immediately solved. A lot of people have experienced this problem with Toy Story 3 and this particular player.

I had to update my firmware on my Samsung BD-P1500. Followed the instructions on the Samsung Website. Make sure you use ISO Burning SW. I wasted 3 CD-R trying to burn the disk correctly.

Have you updated your Blu-Ray player recently? All BD players need to be updated from time to time because of the growing technology of Blu-Ray. Its always been a con of BD players. Best thing to do is have your player connect to the internet.
I hope this is the back of your player. Connect your Cat5 (Ethernet cable) to your BD player and than to your router or modem. The port should look like this on the back of your player.



Once you have this connected start your player and it will have a option in the menu to update. Once the update is complete Toy Story 3 and all new BD discs should work. If not, its possible that the disc is bad. More often you just need to update the player.

this same thing is happening to me. It took forever to load Toy Story 3 (10 minutes?) and I've been waiting over 15 minutes for Robin Hood to load - I don't think it is going to. Sharp BD-hp20, new firmware.