Basketball - Recent Questions, Troubleshooting & Support

As silly and bizarre as this may sound... just take the pole and raise it to shoulder height and throw onto the grass at an angle. It may take a few attempts but the pole WILL come apart. I know you think I'm crazy ...but it does work. It's almost like a Chinese finger trap.

The locking teeth or retention spring, if equipped may be damaged and blocked.

I would contact the manufacturer.

push on the back board up to get it to lock. Use the catch plate to bring it down.

check the bar codes

It is important to keep your practices fast paced. By doing each drill for no more than five minutes, you allow each player to maintain a high energy level without getting tired of the specific exercise.

The first African American player to be drafted and play in the NBA was Earl Lloyd in 1950. In 1955, he even led his team to the championship.

http://www.instructionsmanuals.com/

Printers are programmed to reject non-genuine ink tanks and toner cartridges. Some of them are also designed/programmed to stop working altogether if you fit an aftermarket product and you will have to get a new printer. Most likely you have one of those. Never use non genuine products. You can try and pull the new genuine OEM toner cartridge out and refit it and see if the machine will reset and recognise it. If not I don't think you are going to get it printing again and you will be up for a new printer.. Follow some of the trouble shooting procedures in the user manual and if none of these work you are probably done with that printer.

It depends on gender and size, but I found a wide variety on eBay.

https://m.youtube.com/watch?v=iwguLUWPGDc

I would clear any loose debris, repack around pole with a dry concrete mix then add water to it make sure pole is level, brace if necessary and give 24 hours to set up.

Air brush is best, and least messy.

Should have a union in center of post.

As a high school basketball coach for a girl's team, the first thing I always tell them is to not use hand lotion. This adds to excess slippery sweat on the palms. You should be gripping the ball between your palms. When you shoot it, instead of tossing it from your palms, throw it with your arms.

Go to Home depo or hard where store that sales plumbing pipes. Take one of the pipes with you and match the size to the L joints they have. Spray paint black to match and down. A whole lot cheaper then buying the original L joints.

http://www.atlantahoops.com/pdf/huffy/68454.pdf http://www.atlantahoops.com/pdf/huffy/68454.pdf

African antelope list kewel, kob, kirks dik, klipspringer and kudu

Your either going to have buy a new one which I'm sure you want to be a plan Z. With that said, your going to have to weld it at a position that is not adjustable or is possible weld and screw 2 sides where it can move at the broken angle