Washing Machines - Recent Questions, Troubleshooting & Support

Try disconnecting the power for 2 minutes and then reconnect. The logic board should sense it is full of water and pump it out.

If not, remove the drain hose and lower it into a pail or floor drain.

Some filters are behind the front kick plate, some are accessed from the rear. If you remove it, all the water in the machine will come out and make a big mess.

Candy Washing... | Answered 14 hours ago


Check Engine Light Guide - Geo Metro Forum

https://geometroforum.com > Metro Tech > Engine Tech & Diagnostics

Sep 11, 2008 - Insert a spare fuse into the port and then turn your key to the "ON" position. The check engine light will then blink a 2 digit code over and over. HOW TO CHECK THE ENGINE LIGHT
May 31, 2012
check Engine light
Jun. 12, 2015
Random check engine light???
Aug. 5, 2011
Check engine light issue
Jul. 31, 2009
More results from geometroforum.com

Geo Metro Suzuki Swift check engine light diagnostic trouble ...

https://www.robietherobot.com > metro > errorcodes

86-95 Suzuki Swift & Geo Metro Diagnostic Trouble Codes (DTC) may be accessed by installing a spare fuse into the fuse box diagnostic terminal, located under the LH side of the instrument panel, then turning the ignition On.

Washing Machines | Answered 14 hours ago

There's a part under the agitator that lifts off if you pull up from the bottom on both sides) called a coupler that is attached to the shaft with one bolt. The plastic teeth probably have stripped off from this coupler, causing the agitator to not agitate properly.

I would buy the part on amazon.
Here's the link to the exact part:


Video to show how:


GE Washing... | Answered 20 hours ago

$70 from a place like Repair Clinic/ Make sure you have the right model. I wonder what diagnostics brought you to the conclusion you need a new main board?

Samsung Washing Machine Circuit Board Timer Parts

Samsung DC68 20425B washing machine motherboard Google Search

Samsung Washing... | Answered Yesterday

check under agitator for broken cogs or gears under plate

Whirlpool... | Answered Yesterday

Hi, it could be leaking from the fill hose on the top left, just under the dispenser. You can take the top panel off with 2 quarter inch screws on the back of the panel. Then look under the dispenser while the machine is filling. Best of luck!


Washing Machines | Answered Yesterday

It should be flashing a code that you can look up. A common code is for the pump to be jammed with something. It can be freed up through an access point under the lower front cover.

Whirlpool... | Answered Yesterday

Please tell us what you have tried so far?
Do you mean that you have levelled it with the adjustable feet, and that the feet somehow change and it becomes not level?
When you levelled it, did you re-tighten the lock nuts?

Washing Machines | Answered Yesterday

Not finding what you are looking for?
Washing Machines Logo

258,383 questions posted

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers


Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides