Recent Questions, Troubleshooting Help & Support - Page 2
How often should I visit my dentist?
Most adult and children visit the dentist for regular
checkups and cleanings every six months. People at greater risk should have
checkups more often.
My traction control lights on in my 2007 Ford Freestyle 3.0 and I want to know if there's a vacuum that hooks up to that where it's at
This could be two different issues. For the dash light get the vehicle plugged into an OBD scanner or a diagnostic system to check for Trouble Codes. These will give clues as to what and where the issue could be. Comment below with them and I'l try to help explain them.
Unless the problem is with the brake booster most traction control systems do not use a vacuum to operate it. It is usually a set of electronic sensors on the wheels that the ECU uses to monitor tyre grip.
As I cannot look at the car myself for that hose you will need to get a good mechanic to look at it. The vacuum hose could go to many things like the EGR system, the Turbo (if fitted) or possibly to the transmission.
ADVANTAGES AND DISADVANTAGES OF USE DIGITAL TECHNOLOGY
Again, if you need to learn or get a general abstract, experts in programming and IT technologies. From the site of the
Studydaddy we are always ready to help you and tell you. Go to the website and contact us! A recent breakthrough in the field of digital security systems has coincided with the increasing proliferation of digital technologies and IP (protocol of interaction and exchange of digital information between networks). Digital technologies have become a solution to the problem of faster and more reliable information transfer. While analog technologies are considered obsolete. However, if you want to completely switch to digital systems, think twice - each system has its pros and cons.
4/18/2024 7:58:56 AM •
Homework
•
Answered
5 hours ago
How to install autocad 2004
I had no issues installing AutoCAD onto a Windows 7 x86 Professional system. User is making and saving new drawings as well as opening existing drawings.AutoCAD 2004 works fine on Windows 7 Professional 32-bit.
Hi my renault sandero1 1.6 2010 model.. immobilizer stopped working and is no longer starting
Possible causes: Damaged antenna, lack of synchonization with the key, electronic failure with the immobilizer or the computer it accesses. This well may call for a Renault specialist to diagnose but here is what you can try:
To address this issue, consider the following steps:
- Disable Immobilizer and Start Engine Without It:
- Obtain the pin code (usually available from the immobilizer itself or through dealers).
- Try starting the engine without the immobilizer. If successful, this indicates an immobilizer-related issue.
- Inspect Soldering on the Immobilizer:
- Visually check the quality of soldering connections on the immobilizer.
- Remove Aftermarket Devices:
- Turn off any additional devices (e.g., aftermarket radio) that were not part of the manufacturer's original setup.
- Check Wiring Integrity:
- Inspect the wiring for any visible damage.
- Verify Lighting and Reversing Lights:
- Ensure proper functioning of lighting systems.
- Consider Temperature Effects:
- If possible, leave the car indoors to avoid extreme cold, which can affect immobilizer performance.
- Check Neutral Position:
- Confirm that the transmission is in the "neutral" position before starting the engine.
Not finding what you are looking for?